Are you having tension issues or skipped stitches?

Well, you might just need to do a little sewing machine maintenance! This means cleaning your sewing machine and giving it a little TLC:) This post will give you some tips and show you how to clean a sewing machine. Now I am as guilty as the rest when it comes to cleaning my machine, but it is seriously one of the most important things you can do as a quilter….these babies are our lifeline, right?

Why do I have to clean my machine?

Our thread and fabrics produce a lot of lint and dust that gets down in the feed dogs, bobbin case and under the throat plate while we are sewing. You will be really shocked if you have never looked inside these parts of your machine! This dust and lint can cause the parts of your machine to not work properly and the result is tension issues, skipped stitches and even machine failure. My machine has a lot of electronic sensors and if I don’t clean it, I notice they start to not work properly.

What do I need to clean my machine?

A screwdriver, a lint brush and my favorite….a pipe cleaner.

How do I get inside the machine?

First and foremost, consult your machine manual! Some machines are different, but here is the basics. Remove your bobbin cover and bobbin and then using a small screwdriver, remove your throat plate. My favorite screwdriver didn’t come with my machine, but it has a magnetic tip on one end that helps me catch those tiny screws so I don’t lose them.

What do I do now?

Using your lint brush and your pipe cleaner, gently remove all the lint you can see. I use a pipe cleaner that has these fluffier parts, they really grab a lot. Swipe all the areas that your thread travels; the tension discs and the take-up lever can also get linty.

I use a piece of scrap batting to wipe it on so it doesn’t try to run away:)

Yes, I took some of these pics after the fact….are you ready to see what I pulled out first????

Um, what the heck is this thing! Disgusting. I told you I was bad.

You will also need to lift out your bobbin case. Take note of how you got this out so you can put it back. Take a pic with your cell phone if you want to keep a reference. Most of these parts only go back in one way.

Get ready for more nasty!

Some references will tell you to use compressed air to blow out the dust, but others believe this forces dust into other areas where is shouldn’t go….use your discretion, but I skip the forced air(and I think most of us don’t have any!)

Put everything back in place and do some test stitching to make sure you are back in working order! Craftsy has a free video on how to clean your machine called Sewing Machine 911. It has lots of other good machine maintenance tips too. Click on the link below to check it out! This is great for beginners.

What else can you do to take care of your sewing machine?

•Keep a cover on it. This keeps all the dust and maybe even pet hair that floats around from settling in your machine.

•Change your needles often! Why do we spend hundreds of dollars on our quilts and shrink away from changing a one or two dollar needle? Your machine likes it and your quilting/piecing will be more accurate. About every 8 hours or even every project is good.

A GIVEAWAY!

This past week I won an awesome selection of Superior Needles from Superior Threads!

So as an incentive to get you to change your needles and because it is almost Valentines Day…I am going to share the love!

I am going to giveaway this variety set of Titanium coated needles! Just leave a comment below and you are entered.

Contest ends Friday at midnight, Feb. 14th. Open internationally:)

You can find and follow TheSassyQuilter here on Facebook, Pinterest, Bloglovin’, or by email(form on right sidebar)!

Keep it Sassy♥