Quilting Supplies at Craftsy.com
04-01-2014

Union Jack Sewing Machine Cover Tutorial and Giveaway!

unionjacktutorial

Hi there! Paula here at The Sassy Quilter and I am so excited to be the first stop on the

Riley Blake Designs Union Jack Blog Tour!

Union Jack Blog Tour

So….Have you guys seen Riley Blake Designs super cute Union Jack panels!!! Well, I have come up with a sewing machine cover tutorial for you to put these snazzy prints to use. We don’t want our precious machines getting all dusty and if you have ever tried to piece one of these Union Jack designs you will totally appreciate how quick and easy these panels are to use.

Riley Blake has three different color options for a multi flag panel. The smaller flags within the panel are each 9″ x 11″. There is also a giant flag panel that measures 36″ x 42″ and comes in three color options. Click HERE to see!

Today I am using the Union Jack Squares Gray panel.

unionjackpanel

What you will need:

1 Union Jack Squares Gray panel.

5 Fat Quarters in assorted prints.

1/4 yard Border fabric.

1 and 1/4 yards Backing fabric.

1/2 yard Binding fabric.

rileyblakedots

I am using a collection of Riley Blake Swiss Dots with my panel prints!

Cutting:

From Panel-

Trim two flags to 9.5″ x 11.5″- (1/4″ around the flag)

From Border fabric-

Cut (2)- 4.25″ x  WOF strips, then subcut (4) 4.25″ x 9.5″ rectangles.

Cut (2)- 2.5″ x WOF strips, the subcut (4) 2.5″ x 19″ strips.

From FQ’s-

Cut (1)- 9.5″ strip from each FQ, then subcut (6) 2″ x 9.5″ strips for a total of 30.

From Backing fabric-

Cut (1)- 17″ x WOF strip, cut again on fold to yield backing for front & back panels.

Cut (2)- 12″ x WOF strips, trim selvages and join along the 12″ edge. Trim this long strip to 12″ x 50″ and use as backing for the side panel.

From Binding fabric-

Cut (1) 18″ x WOF strip, then subcut 2.5″ strips on the bias and create at least 160″ of bias binding.

Construction

unionjackpiecingPiece together your front and back panels. Add your side borders first and then the top and bottom borders. Repeat for the back panel.

unionjack6

Join your 2″ strips together to form one long side panel.

      unionjacksidepanel unionjackquiltedfronts

Layer your front and back panels and your side panel with batting and backing, quilt as desired.

Trim your side panel to 9.5″ x 45.5″ and the front/back panels to 13″ x 18.5″.

Using your bias binding…bind the bottom edge of the front & back panel and both short ends of the side panel.

unionjackcenters

Line up the center point of the front panel with the center point of the side panel. Pin these together with the backing sides together.

unionjack7

Join these two panels together stopping and starting 1/4″ from the corners. Repeat for the back panel.

unionjack8

Now, pin the remaining sides of the front & back panels to the side panel and stitch together, also stopping and starting 1/4″ from the corners.

unionjack9

Your sewing machine cover should look like this, with raw edges exposed.

unionjack10

Now to bind these raw edges!

Starting at one of the bottom corners…Fold the end of your binding under about 1/2″ and start attaching your bias binding to the side panel side of the raw edge.  I stop and start 1/4″ from the top corners to avoid any puckering in the corner. Do not trim anything…just skip a few stitches and then keep going.  Bias binding is stretchy so should go around smoothly.  Stop sewing about 3″ from the final corner. Mark your binding strip and trim 1/2″ longer than needed. Fold this extra under and then finish attaching the binding. Repeat for the opposite side of the cover.

unionjack11

Hand stitch the binding to the front & back panels.

unionjack12

The finished dimensions are 9.5″W x 13″H x 18.5″L. It will fit most average size machines.

  unionjack13

Done! I think it looks bloody fabulous;)

Wanna see the inside???

insidecover

Do you want to make one of these? Fort Worth Fabric Studios is offering you a special deal this week and a GIVEAWAY!

Fort Worth Fabric Studio

20% off all Union Jack Panels through April 7th with discount code:

UNIONJACK20

Click HERE to get your panel, or….

Click HERE to get this awesome kit Jodie created! She even has one for me to GIVEAWAY!!!

***GIVEAWAY!***

Leave a comment to enter to win this kit to make your own sewing machine cover:)

(Giveaway ends Sunday at midnight/EST, open internationally.)

 

Riley Blake Union Jack Blog Tour Schedule:

 

Tuesday 4/1 – Paula at The Sassy Quilter- You are here:)

Thursday 4/3 – Jina at Jina Barney Designz

Tuesday 4/8 – Karin at Leigh Laurel Studios

Thursday 4/10 – Marni at Haberdashery Fun

Tuesday 4/15 – Julia at My Fabric Obession

Thursday 4/17 – Molly at Rose and Odin

Tuesday 4/22 – Amanda at Jedi Craft Girl

Thursday 4/24 – Madame Samm at Sew We Quilt

Tuesday 4/29 – Julia at Riley Blake Designs

Thursday 5/1 – Ginny at Darling Adventures
 

 Hope you enjoy your visit here today! Here are a few things you might want to check out:

Helpful Charts– a collection of charts useful to Quilters, Quilting Tips– tips and tricks for Quilters, Free Tutorials and Patterns for beginners and Quilty Fun– quilting games perfect for retreats and guild meetings!

I am also currently hosting a Triangle Quilt Along and it is never too late to join in!

Trianglebutton250

You can find and follow TheSassyQuilter  on Facebook, Pinterest, Bloglovin’, Instagram, Twitter or by email updates(form on right sidebar)!

Keep it Sassy

 

Share Button