Quilting Supplies at Craftsy.com
10-22-2013

Design Wall in action!

Design Wall in action

Finished up my Triangle quilt top this weekend and put my new design wall into action. This thing was a life saver and I have no idea why I waited so long to make one! Here is the tutorial on how to make your own Design Wall that I shared earlier. Easy and cheap people:)

The fabrics are Simply Style by V&Co. just the blue and green shades though. Can’t wait to get this sandwiched and quilted. If you know me, it may take a while to get that done:) I like to save up a few and have a sandwiching party.

Design Wall for quilting

What to know about these triangles….wayyyy  stretchy. I wish I had starched my fabric before I cut it instead of after cutting the triangle. A little over anxious to get started on this one. Better late than never!

Moona-Ad-125

I have already started my next project which was inspired by Kelly@MyQuiltInfatuation. She used a double slice quilt pattern and said it was quick and I was looking for just that. Here are the gorgeous fabrics I ordered from Moona Fabrics on Etsy. Piper by Dear Stella is the fabric line. Love, love , love these and they weren’t easy to find(been out a while). Sue@Moona Fabrics was so quick to answer my questions and help me get the bundle I was looking for… and they arrived lickety-split! You guys should definitely go and check them out here. Lots of yummy fabrics over there and Sue is kind enough to offer us a coupon code for free shipping on domestic orders over $30! Expires 11/1/13 so you better snap it up quick!

Design Wall in action

Design Wall in action

Moona Fabrics has more of this line(Piper by Dear Stella), Lucky Girl by Jennifer Paganelli, Lottie Da by Heather Bailey,  and many others . . .

moonacoupon

so visit Sue at her online shop here!

Keep it Sassy

Links:

 

Share Button
10-16-2013

How to make your own Design Wall!

IMG_3674

———————–

Design wall envy???

————————

Guilty! I have been wanting one of these forever! And If you are like me…you just do not have a wall big enough(or empty enough) to dedicate as a design wall. I have seen some options for hanging something on the closet doors or frames that stand in the middle of the room, but those are either too flimsy or take up too much space. I wanted something free standing(but slim), light, easy to move around, and that I could mount on the wall if I decided too. I read once you could use some sort of foam board to make one, but that is about all I remembered! So I headed off to Home Depot and Joann’s and made it happen!

This tutorial will show you how to make your own Design Wall for about $25 or less!!!

Supplies:

→One sheet of foam insulation board. I bought this at Home Depot for $12. It measures 4′ x 8′ x 1/2″.

IMG_3667

The foam insulation board actually consists of a 1/2″ piece of foam with a paper layer on both sides. The back side of this board is a metallic paper. These foam boards can look different or even be just foam. Doesn’t really matter because we are covering it up any way.

IMG_3679

→A vinyl Design Wall by Fons & Porter or If you want to save even more you can use the back side of any vinyl tablecloth(no grid lines- no big deal).

I bought this at Joann’s for $25 then used their 50% off coupon so it was only $12.50. They have a 50% or 40% coupon every week.

fonsandporterdesignwall

→Binder clips, about 12 will do. I didn’t price these, but they are very inexpensive and I figure most of us have some laying around anyway.

IMG_3681

How to assemble:

1. Center and stretch the pre-packaged design wall or vinyl tablecloth onto the foam board. Smooth out any wrinkles to make as flat as possible. Leave excess foam board all at one end.

Tip: If your vinyl design wall or tablecloth is wrinkled…do not iron it! Just stretch it out and let it relax naturally. You can see on my board that I have a few “bubbles” in my wall. I got a little too happy with the iron trying to steam out the wrinkles. These spots are not a problem, but best if avoided all together!

 

IMG_3664

2. Lay foam board flat on the floor and using your longest ruler(6 x 24 here) line it up with the end of the design wall where you want to remove the excess foam board.Here you need to decide how much board you want to leave at the bottom.

Things that may affect where you trim your board:

how you are going to use your design wall– horizontally or vertically.

I am using mine vertically and didn’t want the design area touching the floor. If horizontal, you may want a small area left on each end for mounting or none at all.

will your design wall be movable– fixed to a wall or movable from room to room.

I want mine to be able to move to where ever I am sewing at- kitchen, sewing room or I can break it down and take it to a guild meeting.

your height– I am short so I left only 2″ at the bottom.

IMG_3647

3. Using your rotary cutter, gently press the blade through the top layer of paper on the foam board and work your way across the board.

Be careful not to go through to the other side here!!!

IMG_3654

4. Gently snap the foam board, leaving the paper backing still intact.

IMG_3657

5. Using a pair of scissors or an x-acto knife/box cutter to slice through the paper backing.

IMG_3658

IMG_3662

and Voila!

You can save that small piece for another project or make a mini design wall using leftover batting or flannel to cover it.

IMG_3675

Here is mine in action.

I have to say I am head over heels in love with it! It is so light and portable. I can just bring it in the living room with me while I am sewing at the kitchen table and easily take it back to my sewing room when I’m done:) Because it is so light it should be no problem to attach it to a wall if you like. Some simple hooks or Command strips will do the trick if your real classy and don’t want to put any nail holes in the wall:)

No need for a giant empty wall to get your design on!

Sassy indeed

Links:

WIP Wednesday at Freshly Pieced     stitch by stitch

Sew Cute TuesdayFresh Poppy Design

Share Button